An aluminum frame is the extruded aluminium profile system that carries glass, panel or slab in a building — the head, jambs and sill members, plus the mullions and transoms that divide a larger opening. On its own, aluminium conducts heat, so a modern aluminum frame is never a single extrusion: it is a thermally broken system with a polyamide or foam insulator separating the inner and outer faces. This guide covers what an aluminum frame system is, how the thermal break is built, how it is used across windows, doors and curtain walls, the size and structural numbers that matter, the common finishes, what drives the price, and what a manufacturer needs from you to quote one.
It is written from the factory floor rather than a showroom. On the factory side, an aluminum frame is an extrusion decision before it is a glass decision: the profile depth and the thermal-break width set the U-value, the screw-holding and the sightline, and those set everything downstream — glazing pocket depth, reinforcement, and how the frame meets the wall. The frame is the product; the glass just fills it.

What an Aluminum Frame System Is
A bare aluminium frame would bridge heat straight through the wall, so every worthwhile aluminum frame today is built as two extrusions — inner and outer — joined by a non-metallic strip. The system is defined by three things:
- Profile (the extrusion shape) — the cross-section that defines the glazing pocket, the drainage path and the screw channels.
- Thermal break — the insulator that stops heat short-circuiting through the metal.
- Assembly logic — how head, jamb, sill, mullion and transom lock together into a window, door or wall.
The same extrusion family is reused across applications: a window frame, a door frame and a curtain-wall frame differ mostly in depth, reinforcement and how the corners are joined, not in the base alloy.
How the Thermal Break Is Built
A bare aluminum frame would conduct heat like a radiator, so the break is the whole point. The common constructions:
- Polyamide strip (PA66GF) — the most common thermal break; a glass-fibre-reinforced nylon bar clamped between the inner and outer aluminium shells.
- Injected foam break — the cavity between shells is filled with low-conductivity PUR foam for a deeper, lower-U break.
- Structural tie — the two shells must still transfer load, so the break is interrupted only where insulation sits and reinforced where fixings land.

With a deep enough break, an aluminum frame reaches the conductivity class of a composite or uPVC frame while keeping the metal’s screw-holding and slim sightlines — which is why it is the default for large openings.
Aluminum Frame Across Window, Door and Curtain Wall
| Window frame | Door frame | Curtain wall | |
| Typical depth | 60–90 mm | 60–120 mm | 100–200+ mm |
| Structural role | Holds glazed sash | Carries slab weight | Carries floor loads |
| Corner join | Corner-keyed | Reinforced / welded | Pressure-plate stick |
| Max size driver | Sash weight | Slab weight | Bay + wind load |
| Best use | Daylight openings | Entry / passage | Full facades |
For the door-specific version of this logic, see our aluminum door frame guide; for a composite alternative at smaller openings, our composite door frame page compares the trade-offs.
Profile Sizes and Structural Numbers
| Parameter | Typical frame | Notes |
| Frame depth | 60–200 mm by application | Deeper = better U-value and bigger spans |
| Break width | 24–40 mm | Wider breaks lower U-value |
| Wall thickness accepted | Up to ~200 mm with jambs | Extension jambs available |
| Max sash / slab weight | Series-dependent; heavy-duty 200 kg+ | Confirm per series |
| Finish | RAL powder coat, anodized, wood-effect | Both sides can differ |

For an exterior aluminum frame the depth and break-width numbers decide the energy performance, so read them off the datasheet, not the brochure photo. A complete-frame U-value in the region of 1.4–1.8 W/(m²·K) is achievable with a deep break and good glazing for documented assemblies — ask for the tested frame-plus-glazing value, and which standard it was tested to for your market.
Finishes: RAL, Anodized and Wood-Effect
Aluminium’s biggest aesthetic advantage is finish range. The three to know:
- RAL powder coat — the default; any RAL colour, durable, UV-stable.
- Anodized — a metallic, brushed or satin look that is integral to the surface, not a coating.
- Wood-effect sublimation — a printed grain over a powder base for a timber look without the maintenance.

The finish does not change the thermal number, but it changes the lead time and the price, and a two-tone frame (different colour inside and out) costs more than a single colour.
What Drives the Price of an Aluminum Frame
| Driver | Effect on price |
| Thermal-break width | The biggest line after profile: wider breaks cost more and pay back in U-value |
| Frame depth | Deeper profiles use more metal and need larger tooling |
| Finish | Anodized and wood-effect cost more than standard RAL; two-tone more than single |
| Gaskets & hardware | Premium multi-fin gaskets and heavy-duty hinges add cost |
| Assembly vs kit | Factory-fabricated frames cost more than cut-to-length but save site labour |
Budget the project from an itemised quote that separates profile, break, finish, glazing and packing — not from a price per metre, which hides exactly the thermal-break line that decides the energy number. Our aluminum window price benchmarks explain how factory pricing is built line by line.
Specifying for Export: What to Send for a Quote
An aluminum frame inquiry quotes accurately when it arrives with four things:
- Opening schedule — width × height per opening, wall depth, and how many units.
- Application intent — window, door or curtain wall; slab or sash weight; new-build or retrofit.
- Performance targets — U-value, any acoustic or hurricane rating, and the destination climate.
- Destination market and standard — country and applicable code (NFRC/NAFS, CSA A440, AS 2047, EN 14351-1); our import compliance checklist lists what each market requires.
With those four items we return a dimensional drawing and an itemised quote, and the drawing — not the brochure — is what your crew builds to.
FAQ
What is an aluminum frame made of?
Two aluminium extrusions — inner and outer — joined by a non-metallic strip (usually glass-fibre-reinforced nylon) that stops heat bridging straight through the metal. Without the break the frame conducts heat like a radiator.
Is an aluminum frame better than composite or uPVC?
For large spans, slim sightlines and screw-holding, aluminium is the better default. Composite often beats it on conductivity and price at smaller residential sizes. The right choice is opening-specific — compare our aluminum door frame with the composite option before deciding.
How wide should the thermal break be?
Wider breaks lower the U-value: 24–40 mm is the typical range, with deeper breaks reserved for high-performance or cold-climate openings. Confirm the tested value, not the strip width alone.
Can one aluminum frame system cover windows, doors and curtain walls?
The same extrusion family is reused across all three; they differ mainly in depth, reinforcement and corner join. A curtain wall needs the deepest profile and the strongest ties, while a window frame can stay shallow. Confirm the series rating for the exact application before specifying.
Ready to Price a Project?
Send your opening schedule — sketches are fine — and the export team will return a dimensional drawing with an itemised aluminum frame quote. Request a quote from HIMOLON, or browse our aluminum sliding door range that uses the same extrusion logic.
